Bộ lập trình s7-1500 CPU 1513-1PN 6ES7513-1AL02-0AB0

(đánh giá) 0 đã bán

32.000.000 Chưa VAT

SIMATIC S7-1500, CPU 1513-1 PN, bộ xử lý trung tâm với bộ nhớ làm việc 300 KB cho chương trình và 1,5 MB cho dữ liệu, 1. giao diện: PROFINET IRT với công tắc 2 cổng, hiệu năng 40 NS bit, cần có thẻ nhớ SIMATIC

Bộ lập trình s7-1500 CPU 1513-1PN 6ES7513-1AL02-0AB0

32.000.000 Chưa VAT

Mã: 6ES7513-1AL02-0AB0 Danh mục:

Trọng lượng 0.452 kg
Đánh giá Bộ lập trình s7-1500 CPU 1513-1PN 6ES7513-1AL02-0AB0
Chưa có
đánh giá nào
5 0% | 0 đánh giá
4 0% | 0 đánh giá
3 0% | 0 đánh giá
2 0% | 0 đánh giá
1 0% | 0 đánh giá
Đánh giá Bộ lập trình s7-1500 CPU 1513-1PN 6ES7513-1AL02-0AB0
Gửi ảnh thực tế
0 ký tự (Tối thiểu 5)
    +

    Lưu ý: để đánh giá được phê duyệt, vui lòng tham khảo Chính Sách Bảo Mật

    Chưa có đánh giá nào.

    Hỏi đáp

    Không có bình luận nào

    Article number 6ES7513-1AL02-0AB0
    SIMATIC S7-1500, CPU 1513-1 PN, central processing unit with working memory 300 KB for program and 1.5 MB for data, 1. interface: PROFINET IRT with 2 port switch, 40 NS bit-performance, SIMATIC memory card necessary
    General information
    Product type designation CPU 1513-1 PN
    HW functional status FS03
    Firmware version V2.9
    Product function
    ● I&M data Yes; I&M0 to I&M3
    ● Isochronous mode Yes; Distributed and central; with minimum OB 6x cycle of 500 µs (distributed) and 1 ms (central)
    Engineering with
    ● STEP 7 TIA Portal configurable/integrated from version V17 (FW V2.9) / V15 (FW V2.5) or higher; with older TIA Portal versions configurable as 6ES7513-1AL01-0AB0
    Configuration control
    via dataset Yes
    Display
    Screen diagonal [cm] 3.45 cm
    Control elements
    Number of keys 8
    Mode buttons 2
    Supply voltage
    Type of supply voltage 24 V DC
    permissible range, lower limit (DC) 19.2 V
    permissible range, upper limit (DC) 28.8 V
    Reverse polarity protection Yes
    Mains buffering
    ● Mains/voltage failure stored energy time 5 ms
    ● Repeat rate, min. 1/s
    Input current
    Current consumption (rated value) 0.7 A
    Current consumption, max. 0.95 A
    Inrush current, max. 1.9 A; Rated value
    I²t 0.02 A²·s
    Power
    Infeed power to the backplane bus 10 W
    Power consumption from the backplane bus (balanced) 5.5 W
    Power loss
    Power loss, typ. 5.7 W
    Memory
    Number of slots for SIMATIC memory card 1
    SIMATIC memory card required Yes
    Work memory
    ● integrated (for program) 300 kbyte
    ● integrated (for data) 1.5 Mbyte
    Load memory
    ● Plug-in (SIMATIC Memory Card), max. 32 Gbyte
    Backup
    ● maintenance-free Yes
    CPU processing times
    for bit operations, typ. 40 ns
    for word operations, typ. 48 ns
    for fixed point arithmetic, typ. 64 ns
    for floating point arithmetic, typ. 256 ns
    CPU-blocks
    Number of elements (total) 4 000; Blocks (OB, FB, FC, DB) and UDTs
    DB
    ● Number range 1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999
    ● Size, max. 1.5 Mbyte; For DBs with absolute addressing, the max. size is 64 KB
    FB
    ● Number range 0 ... 65 535
    ● Size, max. 300 kbyte
    FC
    ● Number range 0 ... 65 535
    ● Size, max. 300 kbyte
    OB
    ● Size, max. 300 kbyte
    ● Number of free cycle OBs 100
    ● Number of time alarm OBs 20
    ● Number of delay alarm OBs 20
    ● Number of cyclic interrupt OBs 20; With minimum OB 3x cycle of 500 µs
    ● Number of process alarm OBs 50
    ● Number of DPV1 alarm OBs 3
    ● Number of isochronous mode OBs 2
    ● Number of technology synchronous alarm OBs 2
    ● Number of startup OBs 100
    ● Number of asynchronous error OBs 4
    ● Number of synchronous error OBs 2
    ● Number of diagnostic alarm OBs 1
    Nesting depth
    ● per priority class 24
    Counters, timers and their retentivity
    S7 counter
    ● Number 2 048
    Retentivity
    — adjustable Yes
    IEC counter
    ● Number Any (only limited by the main memory)
    Retentivity
    — adjustable Yes
    S7 times
    ● Number 2 048
    Retentivity
    — adjustable Yes
    IEC timer
    ● Number Any (only limited by the main memory)
    Retentivity
    — adjustable Yes
    Data areas and their retentivity
    Retentive data area (incl. timers, counters, flags), max. 128 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB
    Extended retentive data area (incl. timers, counters, flags), max. 1.5 Mbyte; When using PS 6 0W 24/48/60 V DC HF
    Flag
    ● Size, max. 16 kbyte
    ● Number of clock memories 8; 8 clock memory bit, grouped into one clock memory byte
    Data blocks
    ● Retentivity adjustable Yes
    ● Retentivity preset No
    Local data
    ● per priority class, max. 64 kbyte; max. 16 KB per block
    Address area
    Number of IO modules 2 048; max. number of modules / submodules
    I/O address area
    ● Inputs 32 kbyte; All inputs are in the process image
    ● Outputs 32 kbyte; All outputs are in the process image
    per integrated IO subsystem
    — Inputs (volume) 8 kbyte
    — Outputs (volume) 8 kbyte
    per CM/CP
    — Inputs (volume) 8 kbyte
    — Outputs (volume) 8 kbyte
    Subprocess images
    ● Number of subprocess images, max. 32
    Hardware configuration
    Number of distributed IO systems 32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)
    Number of DP masters
    ● Via CM 6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total
    Number of IO Controllers
    ● integrated 1
    ● Via CM 6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total
    Rack
    ● Modules per rack, max. 32; CPU + 31 modules
    ● Number of lines, max. 1
    PtP CM
    ● Number of PtP CMs the number of connectable PtP CMs is only limited by the number of available slots
    Time of day
    Clock
    ● Type Hardware clock
    ● Backup time 6 wk; At 40 °C ambient temperature, typically
    ● Deviation per day, max. 10 s; Typ.: 2 s
    Operating hours counter
    ● Number 16
    Clock synchronization
    ● supported Yes
    ● in AS, master Yes
    ● in AS, slave Yes
    ● on Ethernet via NTP Yes
    Interfaces
    Number of PROFINET interfaces 1
    1. Interface
    Interface types
    ● RJ 45 (Ethernet) Yes; X1
    ● Number of ports 2
    ● integrated switch Yes
    Protocols
    ● IP protocol Yes; IPv4
    ● PROFINET IO Controller Yes
    ● PROFINET IO Device Yes
    ● SIMATIC communication Yes
    ● Open IE communication Yes; Optionally also encrypted
    ● Web server Yes
    ● Media redundancy Yes
    PROFINET IO Controller
    Services
    — PG/OP communication Yes
    — Isochronous mode Yes
    — Direct data exchange Yes; Requirement: IRT and isochronous mode (MRPD optional)
    — IRT Yes
    — PROFIenergy Yes; per user program
    — Prioritized startup Yes; Max. 32 PROFINET devices
    — Number of connectable IO Devices, max. 128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
    — Of which IO devices with IRT, max. 64
    — Number of connectable IO Devices for RT, max. 128
    — of which in line, max. 128
    — Number of IO Devices that can be simultaneously activated/deactivated, max. 8; in total across all interfaces
    — Number of IO Devices per tool, max. 8
    — Updating times The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
    Update time for IRT
    — for send cycle of 250 µs 250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 500 µs of the isochronous OB is decisive
    — for send cycle of 500 µs 500 µs to 8 ms
    — for send cycle of 1 ms 1 ms to 16 ms
    — for send cycle of 2 ms 2 ms to 32 ms
    — for send cycle of 4 ms 4 ms to 64 ms
    — With IRT and parameterization of "odd" send cycles Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)
    Update time for RT
    — for send cycle of 250 µs 250 µs to 128 ms
    — for send cycle of 500 µs 500 µs to 256 ms
    — for send cycle of 1 ms 1 ms to 512 ms
    — for send cycle of 2 ms 2 ms to 512 ms
    — for send cycle of 4 ms 4 ms to 512 ms
    PROFINET IO Device
    Services
    — PG/OP communication Yes
    — Isochronous mode No
    — IRT Yes
    — PROFIenergy Yes; per user program
    — Shared device Yes
    — Number of IO Controllers with shared device, max. 4
    — activation/deactivation of I-devices Yes; per user program
    — Asset management record Yes; per user program
    Interface types
    RJ 45 (Ethernet)
    ● 100 Mbps Yes
    ● Autonegotiation Yes
    ● Autocrossing Yes
    ● Industrial Ethernet status LED Yes
    Protocols
    PROFIsafe No
    Number of connections
    ● Number of connections, max. 128; via integrated interfaces of the CPU and connected CPs / CMs
    ● Number of connections reserved for ES/HMI/web 10
    ● Number of connections via integrated interfaces 88
    ● Number of S7 routing paths 16
    Redundancy mode
    ● H-Sync forwarding Yes
    Media redundancy
    — Media redundancy only via 1st interface (X1)
    — MRP Yes; MRP Automanager according to IEC 62439-2 Edition 2.0, MRP Manager; MRP Client
    — MRP interconnection, supported Yes; as MRP ring node according to IEC 62439-2 Edition 3.0
    — MRPD Yes; Requirement: IRT
    — Switchover time on line break, typ. 200 ms; For MRP, bumpless for MRPD
    — Number of stations in the ring, max. 50
    SIMATIC communication
    ● PG/OP communication Yes; encryption with TLS V1.3 pre-selected
    ● S7 routing Yes
    ● S7 communication, as server Yes
    ● S7 communication, as client Yes
    ● User data per job, max. See online help (S7 communication, user data size)
    Open IE communication
    ● TCP/IP Yes
    — Data length, max. 64 kbyte
    — several passive connections per port, supported Yes
    ● ISO-on-TCP (RFC1006) Yes
    — Data length, max. 64 kbyte
    ● UDP Yes
    — Data length, max. 2 kbyte; 1 472 bytes for UDP broadcast
    — UDP multicast Yes; Max. 5 multicast circuits
    ● DHCP Yes
    ● DNS Yes
    ● SNMP Yes
    ● DCP Yes
    ● LLDP Yes
    ● Encryption Yes; Optional
    Web server
    ● HTTP Yes; Standard and user pages
    ● HTTPS Yes; Standard and user pages
    OPC UA
    ● Runtime license required Yes; "Small" license required
    ● OPC UA Client Yes
    — Application authentication Yes
    — Security policies Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256
    — User authentication "anonymous" or by user name & password
    — Number of connections, max. 4
    — Number of nodes of the client interfaces, max. 1 000
    — Number of elements for one call of OPC_UA_NodeGetHandleList/OPC_UA_ReadList/OPC_UA_WriteList, max. 300
    — Number of elements for one call of OPC_UA_NameSpaceGetIndexList, max. 20
    — Number of elements for one call of OPC_UA_MethodGetHandleList, max. 100
    — Number of simultaneous calls of the client instructions per connection (except OPC_UA_ReadList,OPC_UA_WriteList,OPC_UA_MethodCall), max. 1
    — Number of simultaneous calls of the client instructions OPC_UA_ReadList,OPC_UA_WriteList and OPC_UA_MethodCall, max. 5
    — Number of registerable nodes, max. 5 000
    — Number of registerable method calls of OPC_UA_MethodCall, max. 100
    — Number of inputs/outputs when calling OPC_UA_MethodCall, max. 20
    ● OPC UA Server Yes; Data access (read, write, subscribe), method call, custom address space
    — Application authentication Yes
    — Security policies Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256
    — User authentication "anonymous" or by user name & password
    — GDS support (certificate management) Yes
    — Number of sessions, max. 32
    — Number of accessible variables, max. 50 000
    — Number of registerable nodes, max. 10 000
    — Number of subscriptions per session, max. 20
    — Sampling interval, min. 100 ms
    — Publishing interval, min. 500 ms
    — Number of server methods, max. 20
    — Number of inputs/outputs per server method, max. 20
    — Number of monitored items, max. 1 000; for 1 s sampling interval and 1 s send interval
    — Number of server interfaces, max. 10 of each "Server interfaces" / "Companion specification" type and 20 of the type "Reference namespace"
    — Number of nodes for user-defined server interfaces, max. 1 000
    ● Alarms and Conditions Yes
    — Number of program alarms 100
    — Number of alarms for system diagnostics 50
    Further protocols
    ● MODBUS Yes; MODBUS TCP
    Isochronous mode
    Equidistance Yes
    S7 message functions
    Number of login stations for message functions, max. 32
    Program alarms Yes
    Number of configurable program messages, max. 5 000; Program messages are generated by the "Program_Alarm" block, ProDiag or GRAPH
    Number of loadable program messages in RUN, max. 2 500
    Number of simultaneously active program alarms
    ● Number of program alarms 600
    ● Number of alarms for system diagnostics 100
    ● Number of alarms for motion technology objects 80
    Test commissioning functions
    Joint commission (Team Engineering) Yes; Parallel online access possible for up to 5 engineering systems
    Status block Yes; Up to 8 simultaneously (in total across all ES clients)
    Single step No
    Number of breakpoints 8
    Status/control
    ● Status/control variable Yes
    ● Variables Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
    ● Number of variables, max.
    — of which status variables, max. 200; per job
    — of which control variables, max. 200; per job
    Forcing
    ● Forcing Yes
    ● Forcing, variables Peripheral inputs/outputs
    ● Number of variables, max. 200
    Diagnostic buffer
    ● present Yes
    ● Number of entries, max. 1 000
    — of which powerfail-proof 500
    Traces
    ● Number of configurable Traces 4; Up to 512 KB of data per trace are possible
    Interrupts/diagnostics/status information
    Diagnostics indication LED
    ● RUN/STOP LED Yes
    ● ERROR LED Yes
    ● MAINT LED Yes
    ● STOP ACTIVE LED Yes
    ● Connection display LINK TX/RX Yes
    Supported technology objects
    Motion Control Yes; Note: The number of technology objects affects the cycle time of the PLC program; selection guide via the TIA Selection Tool
    ● Number of available Motion Control resources for technology objects 800
    ● Required Motion Control resources
    — per speed-controlled axis 40
    — per positioning axis 80
    — per synchronous axis 160
    — per external encoder 80
    — per output cam 20
    — per cam track 160
    — per probe 40
    ● Positioning axis
    — Number of positioning axes at motion control cycle of 4 ms (typical value) 5
    — Number of positioning axes at motion control cycle of 8 ms (typical value) 10
    Controller
    ● PID_Compact Yes; Universal PID controller with integrated optimization
    ● PID_3Step Yes; PID controller with integrated optimization for valves
    ● PID-Temp Yes; PID controller with integrated optimization for temperature
    Counting and measuring
    ● High-speed counter Yes
    Ambient conditions
    Ambient temperature during operation
    ● horizontal installation, min. -25 °C; No condensation
    ● horizontal installation, max. 60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off
    ● vertical installation, min. -25 °C; No condensation
    ● vertical installation, max. 40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off
    Ambient temperature during storage/transportation
    ● min. -40 °C
    ● max. 70 °C
    Altitude during operation relating to sea level
    ● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
    configuration / header
    configuration / programming / header
    Programming language
    — LAD Yes
    — FBD Yes
    — STL Yes
    — SCL Yes
    — GRAPH Yes
    Know-how protection
    ● User program protection/password protection Yes
    ● Copy protection Yes
    ● Block protection Yes
    Access protection
    ● protection of confidential configuration data Yes
    ● Password for display Yes
    ● Protection level: Write protection Yes
    ● Protection level: Read/write protection Yes
    ● Protection level: Complete protection Yes
    programming / cycle time monitoring / header
    ● lower limit adjustable minimum cycle time
    ● upper limit adjustable maximum cycle time
    Dimensions
    Width 35 mm
    Height 147 mm
    Depth 129 mm
    Weights
    Weight, approx. 405 g
    last modified: 5/12/2021

    CÔNG TY TNHH VẬT TƯ NHÀ MÁY VIỆT NAM

    Văn phòng:  Số 7 Đường số 9, KP6, P Hiệp Bình Chánh, Tp Thủ Đức, TP.Hồ Chí Minh

    Số điện thoại: 0979-638-638

    Email: sales@vattunhamay.vn

    Website: https://vattunhamay.vn/